Pounds-per-square-inch - traducción al español
UNIT OF MEASUREMENT FOR MASS FLOW
Pounds Per Hour; Pounds per hour
Pounds-per-square-inch
Libras por pulgada cuadrada, unidad para medir presiones.
dots per inch
UNIT OF MEASUREMENT
Dpi; Dots per centimetre; PDI printer; 96 DPI; 96 dots per inch; 96 PPI; 96 pixels per inch; 72 dpi; 72 PPI; 72 dots per inch; 72 pixels per inch; PPem; Dots per centimeter; Counts per inch; Count per inch; Dot density; Dot per inch; Horizontal resolution; DPI scaling in Windows; Printing resolution
= puntos por pulgada
Ex: The consortium's first project was a joint study to explore the feasibility of scanning images of brittle books at 600 dots per inch.
Ex: The consortium's first project was a joint study to explore the feasibility of scanning images of brittle books at 600 dots per inch.
dots per inch
UNIT OF MEASUREMENT
Dpi; Dots per centimetre; PDI printer; 96 DPI; 96 dots per inch; 96 PPI; 96 pixels per inch; 72 dpi; 72 PPI; 72 dots per inch; 72 pixels per inch; PPem; Dots per centimeter; Counts per inch; Count per inch; Dot density; Dot per inch; Horizontal resolution; DPI scaling in Windows; Printing resolution
Punto por pulgada (Medida de cualidad de impresión (número de punto en una pulgada))
Wikipedia
Pound per hour
Pound per hour is a mass flow unit. It is abbreviated as PPH or more conventionally as lb/h. Fuel flow for engines is usually expressed using this unit. It is particularly useful when dealing with gases or liquids, as volume flow varies more with temperature and pressure.
In the US utility industry, steam and water flows throughout turbine cycles are typically expressed in PPH, while in Europe these mass flows are usually expressed in metric tonnes per hour:
- 1 lb/h = 0.4535927 kg/h = 126.00 mg/s
Minimum fuel intake on a jumbo jet can be as low as 150 lb/h when idling; however, this is not enough to sustain flight.
Ejemplos de pronunciación para Pounds-per-square-inch
1. The pressure here is 4,000 pounds per square inch.
ted-talks_343_DavidGallo_1998-320k
2. it would be the thickness of two pennies, at 14 pounds per square inch.
ted-talks_167_StevenPetranek_2002-320k
Ejemplos de uso de Pounds-per-square-inch
1. Federal regulations require sealing blocks to withstand 20 pounds per square inch of force during a blast.
2. But the blast blew the seals open with pressure of at least '5 pounds per square inch, the found.
3. The air pressure in the airlock will be reduced from 14.7 pounds per square inch to 10.2 psi.
4. The explosion took place behind 40–inch–thick seals designed to withstand 20 pounds per square inch of pressure.
5. A third option would be seals capable of withstanding blast pressures of at least 50 pounds per square inch.